WITHOUT GLASS FIBRES
VERY LOW RESISTANCE TO BREATHING
NOSE BAR ADAPTABLE
HIGH FILTRATION CAPACITY
How to use
a . Hold the mask in hand with the metal nosepiece up. Allow harness to hang freely.
b . Position the mask under the chin, covering mouth and nose.
c . Pull the lower head harness over the head, position below ears. Pull the top
head harness on the back of head above ears for best fit.
d . Press soft metal nosepiece to conform snugly around the nose.
e . To check, cup both hand s over the mask and exhale vigorously. If air flows
around nose, tighten the nosepiece, If air leaks around the edge, reposition the
head harness for better fit. Retest the seal and repeat the procedure until the
mask is sealed properly.